Troubleshooting My Furnace

About Me

Troubleshooting My Furnace

As soon as winter rolled around this year, I knew that I had a problem. Our home heating system didn't seem to be working well, and it was really frustrating. We would wake up to absolutely frosty mornings in our own home, and so I decided to pull out the user's manual. I started researching different furnace problems and it occurred to me that the issue might be the filters. I checked them, and you wouldn't believe how full of dust and debris they were. After they were replaced and the air handler was blown out, my furnace started working again. Check out this blog for more information about troubleshooting your furnace.

Dealing With Waste Draining Slowly Out Of A Toilet

Dealing with waste leaving slowly out of the bowl when a toilet is flushed can be frustrating. If you are in such a situation and can't figure out what is causing the problem, assistance from a plumber, like AAA Home Services, might be necessary. If you have already used a plunger in an attempt to resolve the problem, it is possible that your plunger isn't powerful enough to send enough pressure into the bowl hole. A plumber will be able to determine the cause in no time so the proper repair can be made. This article covers some of the things that you should know in regards to a plumber repairing a slow draining toilet.

1. Inspecting the Plumbing Lines

When you call for the assistance of a plumber, one of the things that will be done is an inspection of the plumbing lines. Basically, the plumber will take a look inside of the lines that are in the interior and exterior of your house. Don't worry about him or her having to knock out drywall to perform the task. Looking into the plumbing lines will be easy and won't cause any damage to drywall because a borescope will be used. A borescope is a commercial tool that the plumber will place inside of the plumbing system through a drain to take photos and video footage.

2. Cleaning Out the Plumbing System

If the inspection reveals that your toilet isn't functioning properly due to the plumbing system being congested with waste, a plumber can clean the lines. He or she will first attempt using a commercial plunger to release waste that is trapped in lines that are directly connected to the toilet. He or she might also send a snake into the hole in the bottom of the bowl to free up solid waste and other trapped debris. There are a few ways for a plumber to clean the plumbing system, including jetting the lines out. However, he or she might have to manually clean some of the pipes if the problem is severe.

3. Repairing Problematic Toilet Parts

Waste may have started draining out of the toilet in a slow manner because there are damaged parts that need to be repaired. For example, it is possible that there is a worn out flapper in the toilet tank that does not allow the tank to send a sufficient amount of water into the bowl. A corroded flapper can be replaced by a plumber in no time, and the repair isn't expensive. A plumber might also have to repair the bowl pipe if it is cracked and leaking out water. The bowl pipe is used for routing water into the tank, and slow draining can happen when the tank does not fill up to the right level.